|
D-TEK-LM PLUG-IN 24VAC
- 24VAC plug-In Loop detector
- Works with most LiftMaster gate operators
- Won't work with Elite Series Mega Arm Slide & Swing
- Simply plug it into the harness already in the operator
- Loop lead-in wires connect to operator terminal strip
- Gold plated control contacts
- Includes Loop diagnostics and conditioner
- Replaces LiftMaster model G714167NH
......More Info
|
Log-in for Dealer Price |
|
D-TEK-MVP 9-220V AC/DC
- 9V to 220V AC/DC input voltage
- Gold plated control contacts alum. RF shield housing
- Includes Loop diagnostics and conditioner
- Operates in both fail safe and fail secure modes
- 2 output relays (presence & pulse or presence)
- Replaces PEEK 625X Loop Detector
- Can be used to open a door or gate control lights etc.
- Enhanced Lightning/Surge protection
- Will accept 2 safety loops (wired in series)
......More Info
|
Log-in for Dealer Price |
|
D-TEK-LP 12-24V AC/DC
- 24V AC/DC input voltage only 9mA standby current draw
- Excellent for solar power applications
- Includes loop diagnostics and conditioner
- Gold plated control contacts alum. RF shield housing
- Operates in both fail safe and Failsecure modes
- 2 output relays (presence & pulse or presence)
- Replaces PEEK 625x Loop Detector
- Can be used to open a door of gate control lights etc.
- Includes surge protection
- Will accept 2 safety loops (wired in series) ......More Info
|
Log-in for Dealer Price |
|
IRB4X W/HOODS INFRARED PHOTO
- Suitable for exterior applications Nema 4
- Supply voltage 12 to 24V AC/DC
- 65' Sensing Distance
- NO and "NC" Output
- LED Indication for power supply and target detection
......More Info
|
Log-in for Dealer Price |
|
NIR RETRO-REFLECTIVE PHOTOCELL
- Recommended for interior applications
- Supply Voltage 12 to 240V AC/DC
- NO and "NC" Relay output
- LED indication for target detection
- Reflector included
......More Info
|
Log-in for Dealer Price |
|
PMP12RI RETRO REFLECTIVE
- Requires reflector (ER100 recommended)
- Detection range 40 ft
- Supply voltage 12-240VDC or 24 to 240 VAC
- Operating temperature -25 to +55 C
- Terminal 5 Common "NO" on terminal 4 "NC" on terminal 3
- Move dip switch to change "NO" and "NC"
......More Info
|
Log-in for Dealer Price |
|
PMT20RI & PMT20I THRU BEAM KIT
- Suitable for exterior applications NEMA 4
- Multi-supply voltage 12-240VDC 24-240VAC
- LED indication for power supply and target detected
- Not recommended for carwash applications
- Operating temperature -25 to +55 C
- Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3
......More Info
|
Log-in for Dealer Price |
|
ER4 REFLECTOR ROUND 84MM
- 80mm diameter reflector for reflective type photocells
- For greater distance use ER100
......More Info
|
Log-in for Dealer Price |
|
ER100 REFLECTOR 4" X 4"
- High effiency square reflector
- 20% more efficient than the standard ER4 reflector
- Will work with all brands of reflective photocells
- Greater distance than ER4
......More Info
|
Log-in for Dealer Price |
|
LOOPDETLM PLUG-IN DETECTOR
- Convenient plug-in design with finger grips
- 8 sensitivity settings
- Boost switch for high-profile vehicles
- 4 frequency options
- Low power draw
- Dimensions: 5.5 x 5 x 2 cm
......More Info
|
Log-in for Dealer Price |
|
MWRTA12 XMTR W/ALARM 1CH RCVR
- Kit includes transmitter and receiver
- Transmitter alarm sounds when the battery is low
- Used to connect gate edge to the gate operator
- Operating temperature -25F to 120F
- Model MWRTA02 replaced by MWRTA12
......More Info
|
Log-in for Dealer Price |
|
LOOP SEALANT BLACK 30OZ
|
Log-in for Dealer Price |
|
LOOP SEALANT GRAY 30OZ
|
Log-in for Dealer Price |
|
CPS N4 (GCPS N4)
- Commercial Protector System photo electric sensors
- Includes electrical interface box 41K4629 change to CPICARD
- May be used with additional CPS units
- 45' sensing distance
- Waterproof
......More Info
|
Log-in for Dealer Price |
|
CPICARD CPS INTERFACE BLK BOX
- Interface for CPSL photocells
- Allow CPSL photocells to provide a "NO" contact
- This inteface is included with CPS & CPSN4 photocells
......More Info
|
Log-in for Dealer Price |
|
REFLECTOR HOOD
|
Log-in for Dealer Price |
|
LOOP 4X6 PAVE-OVER 40' LEAD
- 4' X 6' Pre-formed Loop Pave-Over or Direct Burial style
- Designed for vehicle detection with automated gates doors traffic signals and vehicle alert system
- Suitable for gravel driveways and roadways and are usually buried 4" to 8" deep
- Multiple sets can be used to provide free exit or entrance safety and shadow.
- Loop: 18 ga. 16 strand tinned copper wire with PVC jacket enclosed in a rugged PVC flexible conduit
- Lead-in: 50' of twisted 18 ga. 16 strand XLP insulated wire custom lead in lengths are availab
- Connection: Silicone-filled watertight connector ready to accept non metallic lead-in conduit
- Loop detector sold separately.
- Replace part # RL-2040 EL-2060 and PR-46
......More Info
|
Log-in for Dealer Price |
|
LOOP 4X6 SAW-CUT 50' LEAD
- 18 gauge Pre-Formed Saw-Cut loop for paved surfaces
- Allows for loop installation with minimal damage
- Comes with 50' twisted Lead-in wire
- A 3/16" saw cut approx 1.25" deep is required
- used with a detector to activate: lights gates doors
- Must be used with a loop detector
......More Info
|
Log-in for Dealer Price |
|
LOOP 4X8 PAVE-OVER 40' LEAD
- 4' X 8' Pre-formed Loop Pave-Over or Direct Burial style
- Designed for vehicle detection with automated gates doors traffic signals and vehicle alert system
- Suitable for gravel driveways and roadways and are usually buried 4" to 8" deep
- Multiple sets can be used to provide free exit or entrance safety and shadow.
- Loop: 18 ga. 16 strand tinned copper wire with PVC jacket enclosed in a rugged PVC flexible conduit
- Lead-in: 50' of twisted 18 ga. 16 strand XLP insulated wire custom lead in lengths are availab
- Connection: Silicone-filled watertight connector ready to accept 1/2" non metallic lead-in cond
- Loop detector sold separately.
- Replaces part # RL-2440 EL-2460 PR-48 and G5OENL1218
......More Info
|
Log-in for Dealer Price |
|
LOOP 4X8 SAW-CUT 50' LEAD
|
Log-in for Dealer Price |