|
CPS3 CARD INTERFACE CARD
- Allows activation of Timer-To-Close without CPS-L
- Simply plugs into Logic board
- Cut-Resistors on JU1 & R16 to activate timer feature
......More Info
|
Log-in for Dealer Price |
|
CPS-U COMMERCIAL PHOTOEYES
- Commercial photo-eye kit for indoor use (not NEMA 4)
- For LiftMaster Logic 2 3 & 4 commercial operators only
- Allows activation of the timer-to-close
- Includes mounting hardware
- Sensing distance of 30 feet
......More Info
|
Log-in for Dealer Price |
|
CPS-UN4 NEMA4
- Photo electric sensing device
- Waterproof
- Operates with Logic 3.0 control board
......More Info
|
Log-in for Dealer Price |
|
CPS N4 (GCPS N4)
- Commercial Protector System photo electric sensors
- Includes electrical interface box 41K4629 change to CPICARD
- May be used with additional CPS units
- 45' sensing distance
- Waterproof
......More Info
|
Log-in for Dealer Price |
|
CPICARD CPS INTERFACE BLK BOX
- Interface for CPSL photocells
- Allow CPSL photocells to provide a "NO" contact
- This inteface is included with CPS & CPSN4 photocells
......More Info
|
Log-in for Dealer Price |
|
71-90503000 COUNTER 24V
- Non-resettable cycle counter
- Increases one number each time current is applied
- Connects to the 24 volts of contactor coil
- Simple 2-wire connection
......More Info
|
Log-in for Dealer Price |
|
EXT-ANT KIT ANTENNA CO-AX JF
- Medium-Duty Logic external antenna kit
- For use on Medium-Duty commercial operators only
......More Info
|
Log-in for Dealer Price |
|
PED42 GOOSENECK POST 42"
- 42" curb-mount Goosneck pedestal post
- Black powder-coat paint
- 11" offset
- Holes in bottom plate 3" center to center
......More Info
|
Log-in for Dealer Price |
|
A.B. 60-2728 PHOTOCELL
|
Log-in for Dealer Price |
|
CR-2149 UNIVERSAL BEAM SENSOR
- Universal beam sensors
- Works with all major residential operator brands
- Mounting brackets included no wiring included.
- Can be used with existing wiring
- Must cut black wire for Stanley
......More Info
|
Log-in for Dealer Price |
|
PEDESTAL POST 42" ALUMINUM
|
Log-in for Dealer Price |
|
TRAFFIC LIGHT SG10-24RG-LED
- LED Stop & Go Traffic Signal
- Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
- 24 volt DC input voltage only
- Long lasting low power consumption
- Excellent for dock lighting and parking garages etc
- light replacement A16...
......More Info
|
Log-in for Dealer Price |
|
TRAFFIC LIGHT SG10-115RG-LED
- LED Stop & Go Traffic Signal
- Approx. size: 11-1/2" High x 6-1/2 Wide x 4 Deep
- 115 volt AC/DC input voltage. Lens 4 1/4"
- Long lasting low power consumption
- Excellent for dock lighting and parking garages etc.
......More Info
|
Log-in for Dealer Price |
|
306839 (REPLACES F531.32100 )
- Motion sensor for doors / Mounting Height 6.5' to 23'
- 24 AC/DC Input voltage
- Operating temperature -30 C to +60 C
- Differentiates between people and vehicles
- Uses F53990000 Remote
- 12-18v red-black relay1 white-green relay2 brown-blue
......More Info
|
Log-in for Dealer Price |
|
F539.90000 INFRARED REMOTE
- Allows the user to program from the ground level
- Set values are read back and displayed immediately
- One remote will work for all Hercules sensors
- Use with Bircher Detector 306839
......More Info
|
Log-in for Dealer Price |
|
IS-2 INTERLOCK SWITCH NEMA 1
- NEMA 1 switch is engaged by sectional door side lock and disables operator control.
- Mounts next to door lock requies 2-wire connection to operator.
- May be used with most all industrial operators on sectional doors.
......More Info
|
Log-in for Dealer Price |
|
LOOP 4X6 PAVE-OVER 40' LEAD
- 4' X 6' Pre-formed Loop Pave-Over or Direct Burial style
- Designed for vehicle detection with automated gates doors traffic signals and vehicle alert system
- Suitable for gravel driveways and roadways and are usually buried 4" to 8" deep
- Multiple sets can be used to provide free exit or entrance safety and shadow.
- Loop: 18 ga. 16 strand tinned copper wire with PVC jacket enclosed in a rugged PVC flexible conduit
- Lead-in: 50' of twisted 18 ga. 16 strand XLP insulated wire custom lead in lengths are availab
- Connection: Silicone-filled watertight connector ready to accept non metallic lead-in conduit
- Loop detector sold separately.
- Replace part # RL-2040 EL-2060 and PR-46
......More Info
|
Log-in for Dealer Price |
|
LOOP 4X6 SAW-CUT 50' LEAD
- 18 gauge Pre-Formed Saw-Cut loop for paved surfaces
- Allows for loop installation with minimal damage
- Comes with 50' twisted Lead-in wire
- A 3/16" saw cut approx 1.25" deep is required
- used with a detector to activate: lights gates doors
- Must be used with a loop detector
......More Info
|
Log-in for Dealer Price |
|
LOOP 4X8 PAVE-OVER 40' LEAD
- 4' X 8' Pre-formed Loop Pave-Over or Direct Burial style
- Designed for vehicle detection with automated gates doors traffic signals and vehicle alert system
- Suitable for gravel driveways and roadways and are usually buried 4" to 8" deep
- Multiple sets can be used to provide free exit or entrance safety and shadow.
- Loop: 18 ga. 16 strand tinned copper wire with PVC jacket enclosed in a rugged PVC flexible conduit
- Lead-in: 50' of twisted 18 ga. 16 strand XLP insulated wire custom lead in lengths are availab
- Connection: Silicone-filled watertight connector ready to accept 1/2" non metallic lead-in cond
- Loop detector sold separately.
- Replaces part # RL-2440 EL-2460 PR-48 and G5OENL1218
......More Info
|
Log-in for Dealer Price |
|
LOOP 4X8 SAW-CUT 50' LEAD
|
Log-in for Dealer Price |